Example 3: WAN interface as an inbound management port
In this example, the WAN interface is used as an inbound management port.
Figure 3: WAN interface of a FortiSwitch-28C
Syntax
config system interface
edit wan2
next
edit wan1
next
edit internal
end
end
Example 4: Out of band management interface
In the example, an out of band management interface is used as the dedicated management
port.
System Settings
set ip 10.105.142.10 255.255.255.0
set allowaccess ping https ssh
set type physical
set mode dhcp
set allowaccess ping https ssh
set type physical
set defaultgw enable
set type physical
WAN 2 port used as an
inbound management port
Page 9
Managing a FortiSwitch unit with a FortiGate