Enable Remote Listen -I N [984]; View Event Log [985]; Change User Code [986] - Pyronix V2 TEL User Manual

V2 TEL
5 . 1 2 E N A B L E R E M O T E L I S T E N - I N [ 9 8 4 ]
Press the [ or ] keys to scroll to
'ENABLE REMOTE LISTEN-IN' or
enter '984'.
Press t
Press M or N to select the Yes or
No to select the number below to
enable remote listen in:
0 = No
1 = Yes = Default
Press t
5 . 1 3 V I E W E V E N T L O G [ 9 8 5 ]
All events that occur are recorded in the event log. The V2 TEL display will show all
information in order, starting at the most recent event.
The above display shows the following:
001 = Event number (up to 256 events can be logged)
Description of event logged.
Press the [ or ] keys to scroll to
'VIEW EVENT LOG' or enter '985'.
Press t
Press M or N to scroll back and
forth through the log. Press the ]
key to jump to the last event.
Press x to exit.
5 . 1 4 C H A N G E U S E R C O D E [ 9 8 6 ]
The user code can be up to 4 digits.
Press the [ or ] keys to scroll to
'CHANGE USER CODE' or enter
'986'.
Press t
Enter the new user code,
press t
Default user code = 1234
Page: 15
User Manual
Pyronix Ltd