Operating.your.radio.-.Fm - Roberts Digital Radio with Dual Alarms CRD-29 User Manual

Operating your radio - FM
1. Fully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. If in DAB mode, the
radio will tune to the previous DAB station.
3. Press the Band button to select the FM band.
4. Press and immediately release the Auto-tune button, your radio will
scan in an upwards direction (low frequency to high frequency) and
stop automatically when it finds a station of sufficient strength.
5. If RDS information is available after a few seconds the display will
update and show station name.
6. To find other stations press and release the Auto-tune button as
before.
7. To scan the FM band in a downwards direction (high frequency to
low frequency) press and hold down the Auto-tune button until the
display shows the radio frequency changing.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the Volume control to the required settings.
10. To switch off your radio press the On/Off button.
If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
020.8758.0338.(Mon-Fri)
1
4,7
9
9
1
3
10