Setting.the.alarm.time - Roberts Digital Radio with Dual Alarms CRD-29 User Manual

Setting the alarm time
There are two alarm timers which are individually controlled and may
independently to be set to Buzzer, Radio or Off.
Note: Alarm times are set using 24Hr format e.g. 2:30PM is entered
as 14:30
1. Press and hold the required alarm button, alarm 1 or alarm 2.
2. To change the alarm state press the Tuning up or down buttons.
Your alarm can be set to wake you by Buzzer or Radio.
3. Press the Menu/Select button. The hours digits will begin to flash in
the display.
4. Set the required hour using the Tuning up or down buttons.
5. Press the Menu/Select button. The minute digits will begin to flash
in the display.
6. Set the required minute using the Tuning up or down buttons.
7. Press the Menu/Select button to confirm the alarm setting. The
display will show the set alarm time. After a few seconds the display
will revert to normal play mode.
15
1
1
5,7
2,4,6 2,4,6