Removing The M.2 Ssd Module - Dell EMC BOSS-S1 User Manual

Figure 3. Removing the BOSS-S1 card
1 BOSS-S1 card
Figure 4. Removing the modular card
1 modular card

Removing the M.2 SSD module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
12 Deploying the BOSS card
2 card connector on the system board
2 card connector on the system board