Led Status - Barco XDL-4K75 User Manual

3.5 LED and Button indication chart
Button Backlight Status
Button
Standby button
Shutter button

LED Status

LED
PWR (power LED)
LIGHT (Illumination LED)
ERR (error LED)
IR
3.6 Laser Status
About the Laser Status Light
The Laser Status Light is located at the rear top of the projector (reference 2 image 3-8). The Laser Status Light is a real time
indicator of the laser condition.
R5906151 XDL 17/04/2018
Color status
Blinking WHITE (slow)
Blinking WHITE (fast)
Solid WHITE
Blinking BLUE
Solid BLUE
Blinking RED
Off (no color)
Solid WHITE
Solid RED
Color status
Off
RED
ORANGE
GREEN
Off
RED
GREEN
GREEN-ORANGE
Off
RED toggles on/off
ORANGE toggles on/off
RED
GREEN
3. Input & Communication
Description
Projector starts up (booting)
Projector is upgrading firmware
Projector is in Standby mode
Projector goes to ON mode
Projector is ON
Error condition
Projector is OFF, starts up, or is in Standby
mode.
Projector is ON, shutter is open
Projector is ON, shutter is closed
Description
Projector powers up or has no power
Projector is in Standby
Projector is Ready
Projector is on
Light source is off
No light source detected
Light source is on in normal mode
Light source is on in CLO mode
No error
Error
Projector is installing firmware
Warning
IR signal received
IR signal acknowledged
27