Table of Contents
Advertisement
9.5
Themes
About Themes
Themes are used to apply a predefined functionality to the OSD display. There are two options: light (default) or dark.
How to select a different interface theme
1. In the main menu, select System Settings →Themes.
Image 9-15
System Settings Menu — Themes.
2. In the themes menu, select the desired Theme.
You can choose one of the following: Light, or Dark.
9.6
Service Menu
About the service menu
The service menu can only be entered with a Service code.
Image 9-16
Service code
If you have a service code, select Service code with the arrow keys and click OK to enter the entry mode. Enter the code with the
numeric keys and select OK and click OK on to confirm. Otherwise select DISCARD and click OK to return to the System Settings
menu.
Overview
•
Service – Color
•
Service – Statistics
•
Lens Calibration
9.6.1
Service – Color
C
AUTION
unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a P7 calibration, using the
Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the Projector Toolset Reference
guide.
How to adjust the P7 native settings
1. In the main menu, System Settings → Service.
R5906151 XDL 17/04/2018
:
The native colors have been measured and set during factory production. Do not change them,
9. GUI – System Settings
85
Advertisement
Table of Contents
