Alarm / Sensor Setup; Alarm Mode; Alarm Dwelltime; Event Display - LG LDV-S802 Owner's Manual

ALARM / SENSOR SETUP

Sensor and Alarm/Sensor can be set by pressing SET UP button and then moving to EVENT.
> ALARM MODE
Select the event type by using the direction keys to set the signal transmission to alarm output.
- OFF: Alarm Out Off.
- SENSOR : Alarm out when an event is triggered by the sensor.
- MOTION : Alarm out when the motion is detected.
- SENSOR + MOTION : Alarm out by the sensor or the motion detection.
> ALARM DWELLTIME
Configure the duration for generating the alarm.
- OFF: Disabled. (It disables the Alarm Output by setting the alarm on and the dwelling time off.)
- 1 second - 30 minutes: The user can set it from 1 second to 30 minutes using the arrow keys.
Note
The Alarm Dwelltime is to control the time for the external device. It is not the built-in buzzer of the system.
The setup of alarm dwell time should be more than 2 seconds at least.
> EVENT DISPLAY
Select the display type on the monitoring screen when an event (sensor or motion) is detected.
- NONE: No change.
- SEQUENCE: The channel with the event is displayed on the full screen (POP UP), and if an event
occurs on at the other channel, these channels are sequentially displayed.
- SPLIT: It displays with the split screen when an event is occurred.
53