Timeshift (Pause, Live Tv/Playback) Setup And Operation - LG RH4820 Owner's Manual

Timeshift (Pause, Live TV/Playback) Setup and Operation

Introduction
Do not miss a scene from a live broadcast. If the tele-
phone rings while you are watching your favorite live
broadcast, just press "TIMESHIFT" and "PAUSE" before
answering the phone. The timeshift function will be acti-
vated and the broadcast is then recorded for later view-
ing.
After the phone call or viewing interruption, press
"PLAY" or "SCAN" to watch the program.
Press "STOP" to return to the live broadcast.
Timeshift (Pause, Live TV/Playback)
Operation
HDD
You can store a program in the HDD storage cache
temporarily.
Press TIMESHIFT while watching a TV program.
The Progress Bar display appears on the screen as
shown below. The Progress Bar changes to timeshift
icon after 5 seconds.
1 2
PLAY
14:37
3 4
1. Indicates playback mode.
2. Indicates current Timeshift position.
3. Indicates Timeshift start time.
4. Indicates Timeshift elapsed time.
5. Indicates the time that is one hour from Timeshift
start time.
ips
• You can use trick play functions (Slow, Scan, etc.)
during timeshift. Refer to Playback Operation on
pages 34-37.
• You can edit the cached clip during Timeshift to retain
the program on the HDD. Refer to Clip Record on the
right.
ote
If the timeshift operation is elapsed for more than 6
hours, the oldest timeshift section of the cache will be
incrementally deleted.
Clip Record
You can edit during Timeshift to store the program on
the HDD (Hard Disk Drive).
During Timeshift, use pause step, search and
1 1
slow-motion to find the starting point.
CLIPREC
14:37
Press RECORD at the starting point of the sec-
2 2
tion you want to record.
Progress of the edit is indicated in red on the
Progress Bar.
Use pause step, search and slow-motion to find
3 3
the ending point.
Press RECORD at the ending point of the sec-
4 4
tion you want to record.
Normal playback continues.
Repeat steps 1 and 4 to make several Clip
5 5
Records of a program.
Press STOP to stop Timeshift.
6 6
Confirm message will appear.
15:37
5
Use b b / B B to select 'OK' then press ENTER. Or,
7 7
press STOP again.
The current broadcast is displayed on the screen.
otes
• Selected sections are recorded on the HDD.
• If you want to stop Clip recording, press the STOP
button. If you press POWER to stop Clip recording,
the program may not be recorded on the HDD.
• Clip records cannot be made for sections lasting less
than 5 seconds.
Jump to Start during Timeshift
1. Press ENTER during timeshift. The menu will
appear.
2. Press b b and playback starts from the very beginning
of the timeshift.
Jump to End during Timeshift
1. Press ENTER during timeshift. The menu will
appear.
2. Press B B and jumps to the very end of the timeshift
then goes to pause mode.
To Exit the Timeshift
1. Press STOP to exit Timeshift function.
Confirm message will appear.
2. Use b / B to select 'OK' then press ENTER.
The current broadcast is displayed on the screen.
HDD
15:37
47