Omron CJ1W-CTL41-E Operation Manuals page 125

Comparison between CJ1W-CTL41-E and other Counter
CJ1W-CTL41-E
Extra Functions • Programmable Hysteresis
Noise Filtering • Counter Inputs A and B:
Counter Inputs
Initial Counter Value • Can be set in PLC
• The Initial Counter Value is
IORD- and IOWR- Run-time configuration:
instructions
• DM-configuration data
• Range- and Comparison Data
• (Re) Configure Counter Unit
Run-time operation:
• Read Counter Value
• Error Clear
Digital Inputs --
Digital Outputs --
Interrupts Interrupt generation to PLC
CPU:
• By Software Outputs
Error History Log Storage of up to 30 error records Not supported
Function
.
108
(range [1, 255])
100 kHz (Fixed)
transferred to the Unit upon
Power-Up/Restart.
CQM1-CTB41
--
• Counter Inputs A and B:
10 kHz, 50 kHz, 500 kHz
(Programmable)
• Not supported
Not supported
--
4 Digital Outputs
(5 to 24 V)
Not supported
Section D
CS1W-CT041
• Programmable Hysteresis
(range [1, 255])
• Programmable Output Pulse
(Applies to Digital Outputs)
• Rate Measurement
(Pulse rate measurement
based on programmable time
window)
• Programmable Digital Inputs
functions to control individual
Counters
• Counter Inputs A and B:
25 kHz, 50 kHz, 250 kHz,
500 kHz (Programmable)
• Can be set in PLC
• The Initial Counter Value is
transferred to the Unit upon
Power-Up/Restart.
Run-time configuration:
• DM-configuration data
• Range- and Comparison Data
• (Re) Configure Counter Unit
Run-time operation:
• Read Counter Value
• Error Clear
4 Digital Inputs
(24 V, NPN or PNP)
4 Digital Outputs
(12 to 24 V, NPN or PNP)
Interrupt generation to PLC
CPU:
• By Software Outputs
• Digital Inputs
Storage of up to 30 error records