Unit Management Page - AMX SC-N8012 User Manual

Unit Management Page

Click Admin > Unit Management to access the page shown in
Unit Management Page
FIG. 23
TABLE 14
Option
Auto Discover/Discover
Units button
Discovery is
Enabled/Disabled
Remove Selected
Remove All Offline
Add by IP
Import CSV
Export CSV
Select All button
Select None button
Search field
N-Command User Manual
Unit Management Option Descriptions
Description
If this button says Auto Discover, then N-Command is
scanning periodically for new units. If it says Discover
Units, click to search for newly-added units on the
network.
If this button says Discovery is Enabled then
N-Command can discover units on the network. Click to
change to Discovery is Disabled at which point
N-Command will no longer discover units on the
network.
Click to remove all selected units from the Unit
Management page display.
Click to remove all inactive units from the Unit
Management page display.
Click to search for and add a unit by its IP address.
Click to select a CSV file to import for batch
configuration.
Click to export the CSV file for editing.
Click to select all units in the list.
Click to clear out any selections.
Search for a unit on the network by name, IP address,
stream, etc.
Figure 23. Options are described in
Notes
Removes the selected unit from the list of units
discovered by N-Command.
Removes any units in the list that are offline/not
communicating.
Anything listed in the column headings of this page
can be used as a search term (e.g., Name, Type, SN,
etc.).
Chapter 3: Configuration Options
Table 14.
28