Installing The Battery; Unfolding The Arms - YUNEEC Typhoon H Plus User Manual

$2."12$/&<%4 "
A green blinking LED indicates the charger is powered on and ready to charge, and a red blinking LED
indicates the battery is charging. It will take approximately 2.5 hours to charge a fully discharged (not
over-discharged) battery. A solid green LED indicates the battery is fully charged. Alternating blinking
and solid blue LED lights indicates Error.
Be certain to never completely drain a TYPHOON H PLUS battery. Batteries should be stored at
30-50% charge, and never stored at full charge.
WARNING: All instructions and warnings must be followed exactly to prevent property damage
and/or serious injury as the mishandling of Li-ion/LiPo batteries can result in a fire.
NOTICE: Yuneec offers a dual port quick charger (DY5, YUNDY3) that will charge your batteries faster,
and includes a storage function to either charge or discharge your battery to the safe storage percent-
age. To purchase it, please visit www.yuneec.com
power
Green Blinking:
Ready to charge
Red Blinking:
Charging
Solid Green:
Charge Completed
/
Blue Blinking / Solid:
Error

Installing the Battery

Push the battery into the battery compartment until hearing a
'click'.
push & click

Unfolding the Arms

Once the TYPHOON H PLUS has been removed from the stor-
age/transport case, lock the arms in place. Gently lift the arms
unfold & click
until a click is heard.
To unlock the arms, press the PRESS button on the base of the
arms. On new systems, it may be necessary to release the arms
while lifting up on the bottom of the motor with one hand and
pressing the Press button with the other. Doing so relieves some
of the pressure on the locking system.
NOTICE: Do not depress the PRESS button on the arms while un-
folding and locking them into place; doing so may cause the
arms to not engage the locking system.
08