Charge The Batteries; Installing The Propellers - YUNEEC H520E Quick Start Manual

Charge the Batteries

Power the SC4000-4E charger from
a 100-240V AC outlet using the AC adapt-
er/power supply, or from a 12V-17.4V
DC accessory socket/cigarette lighter
receptacle in a vehicle using the included
adapter.
Plug the aircraft battery into the charger
port as illustrated.
Notice:
The batteries are a consumable material
and that they have to be replaced after
they show weakness.
Notice:
Voltage for a long time storage shall be
14.4V~15.6V range. Full charged storage
is prohibited
Green Blinking:
Ready to charge
Red Blinking:
Charging
Solid Green:
Charge Completed
/
Blue Blinking / Solid:
Error
Assembly
ASSEMBLING THE ARMS
Unfold the motor arms and secure
them until hearing a 'click'.

INSTALLING THE PROPELLERS

Mount propeller 'A' on motor 'A' and
propeller 'B' on motor 'B'.
Press and rotate propellers in the
direction the [
propellers locked.
Cross-check to be sure propellers are
properly locked in place.
INSTALLING THE FLIGHT BATTER-
power
IES
Push the battery into the battery
compartment until hearing a 'click'.
] points to until the
push & click
unfold & click
B A