Poi; Orbit; Landing - YUNEEC Typhoon H Plus User Manual

Distance can be adjusted manually between 32.8ft and 295.3ft, and speed between 3.3 ft/s and 32.8 ft/s.
: Taking photos or recording video can be switched by tapping [

POI

Point of Interest allows the pilot to select a subject they would like to orbit and have TYPHOON H
PLUS orbit that subject autonomously.
NOTICE: When the voltage of the aircraft is lower than 30%, the TYPHOON H PLUS will exit TASK
mode and the functions under the TASK mode won't be activated.
Tap the icon to set a center point and set an ideal radius by controlling the joystick. The height
and radius data will be calculated automatically and indicated. Press the Start icon and push the Aile-
ron/Roll control stick, the aircraft will begin to execute POI. The Start icon will become the Pause icon.
The pilot can pause the the task by tapping it.

Orbit

When Orbit Me is enabled, TYPHOON H PLUS flies a circular path around the pilot. Press ORBIT to
enter the Orbit me function.
The center point will be the position where the ST16S is by default. Set an ideal radius by controlling
the joystick. The height and radius data will be calculated automatically and indicated. Press the Start
icon and push the Aileron/Roll control stick, the aircraft will begin to execute POI. The Start icon will
become Pause icon. The pilot can pause the the task by tapping it.

Landing

There are three ways to land the aircraft:
1. Position the TYPHOON H PLUS above the area where you would like to land. Lower down the
retractable landing gear, and then slowly lower the left-hand stick to below the center position. TY-
PHOON H PLUS will descend slowly and land.
2. Activate Home Mode and TYPHOON H PLUS will automatically fly itself back to the home point and
land.
3. Press the icon ( ), then slide the sliding block, and the aircraft will land automatically.
WARNING: Always land as soon as possible after the first low level voltage battery warning, or land
immediately after the second level low voltage battery warning by the Motor LED Status Indicators
flashing rapidly.
] and [
POI
Center Point
R
Radius
Height
H
Pause
17
] icons.
23.9 ft
28.9 ft