Maintenance; Warranty - Wassermann WAPO-Ex Service Manual

Wax scalding and polymerisation unit
Hide thumbs Also See for WAPO-Ex:
Table of Contents

Advertisement

To change the filter and clean the level sensor (white ring), first remove
the cap containers. The perforated plate can then be taken out and you
can remove the flat filter. When inserting a new one, make sure that the
white side is face down and that the filter fits under the raised edge of
the base plate. The base plate is easily removed, giving ready access to
the level sensor and the heater coil. Re-insert the base plate with its
raised edges facing upwards.

8.2 Maintenance

The WAPO-Ex does not need any special maintenance. Just make sure it is clean and
free of lime build-up.

8.3 Warranty

The warranty period for our instruments is 12 months. If faults occur within the warranty
period, contact your dental depot or get in touch directly with our Service department.
Your WAPO-EX combination unit should only be operated in perfect condition. If faults
occur which could harm operators or third parties, the unit should not be used until it
has been fixed.
This warranty does not cover damage caused by improper use, external mechanical
causes, transport damage or interference with the unit by unauthorized persons.
- 15 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

170996Wapo-ex ivocap170995

Table of Contents