Manual Operation - Wassermann WAPO-Ex Service Manual

6.5 Manual operation

Once the unit is ready for use, you can, at any time, activate the hand spray by turning
the ball valve (horizontal). Settings should be as described under 6.2. When you have
finished, always return the ball valve to its original position (vertical).
The WAPO - Ex is ready for use when the temperature is above
55°C, that is, the pump starts operation once the set temperature
has been reached. On addition there is a safety step: the heating
stops automatically when the temperature of the heating is higher
than 99 °C.
Warning: Risk of scalding!
Do not hold the hand spray by the nozzle or hose.
Do not point the spray at living creatures.
The water from the nozzle can be as hot as about 95°C, so should
only be sprayed near the unit lid or the washbasin.
The ball valve (top right on housing) needs to be set horizontal
when scalding with the hand spray. To take the pressure off the
hose and hand spray, always reset the valve to vertical when they
are not being used.
- 12 -