Antenna Spacing Requirements For User Safety - ProSoft Technology RLX2-IHA User Manual

A2406NJ-OCD
A2406S3-DP
A2408NJ-DP
A2408NJ-OC
A2409NJ-OCD
A2410NJ-DY
A2410NJ-OCM
A2412NJ3-DP
A2413NJ-DP
A2415NJ-DY
A2416NJ-DS
A2419NJ-DB
A2419NJ-DP
A2424NJ-DB
A2502S-OA
A2506NJ-OC
A5003S-OBH
A5006NJ-OC
A5007S3-DP
A5009NJ-OC
A5017NJ3-DP
A5019NJ-DP
A5024NJ-DP
A5812NJ-OC
A5829NJ-DB
A2503S3-O
A2503S6-O
A2506NJ3-O
Note: An adapter may be needed for some of the listed antennas to operate with certain radios.

Antenna Spacing Requirements for User Safety

It is important to keep the radio's antenna a safe distance from the user. To meet the requirements of FCC part
2.1091 for radio frequency radiation exposure, this radio must be used in such a way as to guarantee at least 20 cm
between the antenna and users. Greater distances are required for high-gain antennas. The FCC requires a
minimum distance of 1 mW *cm2 power density from the user (or 20 cm, whichever is greater).
Note: If a specific application requires proximity of less than 20 cm, the application must be approved through the
FCC for compliance to part 2.1093.
6 dBi Omni N jack heavy duty collinear with mounting hardware 2.4GHz
6 dBi Panel RP-SMA MIMO antenna with 3 foot pigtail 2.4GHz
8 dBi Directional patch panel N jack with mounting hardware 2.4GHz
8 dBi Omni N jack collinear with mounting hardware 2.4GHz
9 dBi Omni N jack heavy duty collinear with mounting hardware 2.4GHz
10 dBi Directional N jack Yagi with mounting hardware 2.4GHz
10 dBi Omni N jack collinear for marine environment, 2.4GHz
12 dBi Panel N-Jack MIMO antenna 2.4GHz
13 dBi Directional patch panel N jack with mounting hardware 2.4GHz
15 dBi Directional N jack Yagi with mounting hardware 2.4GHz
16 dBi Directional 120 degree sector N jack with mounting hardware 2.4GHz
19 dBi Directional N jack parabolic with mounting hardware 2.4GHz
19 dBi patch panel N jack with mounting hardware 2.4GHz
24 dBi Directional N jack parabolic with mounting hardware 2.4GHz
2 dBi Omni RP-SMA articulating 2.4/5GHz
6/8 dBi Omni N jack collinear with mounting hardware 2.4/5GHz
3 dBi Omni RP-SMA bulkhead mount with 5' LMR195 pigtail 5GHz
6 dBi Omni N jack collinear with mounting hardware 5GHz
7 dBi Panel RP-SMA MIMO antenna with 3 foot pigtail 5GHz
9 dBi Omni N jack collinear with mounting hardware 5GHz
17 dBi Panel N-Jack MIMO antenna 5GHz
19 dBi directional N jack panel with mounting hardware 5GHz
24 dBi directional N jack panel with mounting hardware 5GHz
12 dBi Omni N jack collinear with mounting hardware 5.8GHz
29 dBi directional N jack parabolic with mounting hardware 5.8GHz
3/4 dBi Omni RP-SMA MIMO antenna with 3 foot pigtail 2.4/5GHz
3/4 dBi Omni RP-SMA Dual MIMO antenna with 3 foot pigtail 2.4/5GHz
6 dBi Omni N-Jack Single MIMO antenna with 3 foot pigtail 2.4/5GHz