ProSoft Technology RLX2-IHA User Manual page 81

RLX2-IHx series ♦ 802.11a, b, g, n
Industrial Hotspots
5 Click C
ERTIFICATES
where you enter the certificate files.
Parameter
Certificate Type
Certificate Passphrase
File Location
Don't Validate Server's
Certificate
6 Select the C
7 Click C
HOOSE
(CAcert.pem) and click A
8 Click C
HOOSE
(clientcert.p12) and the password associated with the file, and then click
A .
PPLY
9 Close the Certificate Management dialog box.
10 In the Radio Configuration / Diagnostic Utility window, click A
and attempt to connect to the Master radio.
ProSoft Technology, Inc.
October 30, 2017
. This displays the Certificate Management dialog box
Description
Specifies the type of certificate that you are uploading. It is important
that this is set correctly as the RLX2-IHx series radio does not
distinguish between certificate types in any other way.
A CA Certificate is required for both PEAP and EAP-TLS. This is used
to authenticate the server's certificate. Additionally, for EAP-TLS, a
client certificate and private key are required.
If the certificate is encrypted, enter the passphrase that was used to
create it on the RADIUS server.
Selects the certificate file on your local PC that to be uploaded.
The radio does not validate the server's certificate.
T .
ERTIFICATE YPE
F to select CA Certificate file created previously
ILE
.
PPLY
F to select the Client Certificate combined file
ILE
Configuring a Radio - Detailed Configuration
C
PPLY HANGES
User Manual
Page 81 of 227