Antenna Spacing Requirements For User Safety; Agency Approvals And Certifications - ProSoft Technology RadioLinx RLXIB-IHN User Manual

Recommended Antennas
Part Number Max
Gain
A2503S6-O 3 dBi
A2408NJ-DP 8 dBi
A2506NJ6-0 6 dBi
A5007S3-DP 7 dBi
A2402S-OS 2 dBi
A2404NBHW-OC 4 dBi
A2405S-OM 5 dBi
A2406NJ-OCD 6 dBi
A2502S-OA 2 dBi
A5003S-OBH 3 dBi
A2508NJ-DP 8 dBi
A5019NJ-DP 19 dBi
A5829NJ-DB 29 dBi
A5812NJ-OC 12 dBi
An adapter may be needed for some of the listed antennas to operate with the specified radio.

Antenna spacing requirements for user safety

It is important to keep the radio's antenna a safe distance from the user. To meet the requirements of FCC part
2.1091 for radio frequency radiation exposure, this radio must be used in such a way as to guarantee at least 20 cm
between the antenna and users. Greater distances are required for high-gain antennas. The FCC requires a
minimum distance of 1 mW *cm2 power density from the user (or 20 cm, whichever is greater).
If a specific application requires proximity of less than 20 cm, the application must be approved through the FCC for
compliance to part 2.1093.

Agency Approvals and Certifications

Wireless Approvals
Visit our web site at www.prosoft-technology.com for current wireless approval information.
Hazardous Locations
ANSI/ISA
UL/cUL
ATEX
Ordinary Locations
CSA/CB
FCC/IC
ETSI
Part number Max gain
A2406S3-DP 6 dBi
A2419NJ-DP 19 dBi
A2503S6-O 3 dBi
A2415NJ-OC 15 dBi
A2402S-OSLP 2 dBi
A2404NJ-OC 4 dBi
A2405S-OS 5 dBi
A2408NJ-OC 8 dBi
A2504S-OA 4 dBi
A5006NJ-OC 6 dBi
A2413NJ-DP 13 dBi
A2419NJ-DB 19 dBi
A2410NJ-DY 10 dBi
12.12.01 Groups A, B, C, D
C22.2 No. 213-M1987
EN60079-0 and EN60079-15
EN60950 N. America & W. Europe
Part 15, Class A and ICES-003
ETSI EN300 328 and ETSI EN301 893
Part Number Max gain
A5017NJ3-DP 17 dBi
A5024NJ-DP 24 dBi
A2412NJ3-DP 12 dBi
A082503-80-OBH 3 dBi
A2403NBH-OC 3 dBi
A2405S-OA 5 dBi
A2406NJ-OC 6 dBi
A2409NJ-OCD 9 dBi
A2506NJ-OC 6 dBi
A5009NJ-OC 9 dBi
A2416NJ-DS 16 dBi
A2424NJ-DB 24 dBi
A2415NJ-DY 15 dBi