Job Separator - Toshiba e-Studio2505AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2505AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
Job Separator
The procedure below is for e-STUDIO2000AC/2500AC and e-STUDIO2008A/2508A/3008A with the Job Separator
installed. However, it does not apply to e-STUDIO2505AC/3005AC/3505AC/4505AC/5005AC and e-STUDIO3508A/
4508A/5008A with the Job Separator installed.
Be careful not to let your fingers be caught between the equipment and the duplexing unit cover or
automatic duplexing unit cover.
This could injure you.
Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
Open the automatic duplexing unit cover on the right.
1
2
Open the cover inside of the equipment.
3
Remove the misfed paper.
4
Close the cover inside of the equipment.
Close the automatic duplexing unit cover.
5
38 Clearing a Paper Misfeed
Hide quick links:
Advertisement
Table of Contents
