Envelope Drawer; Large Capacity Feeder - Toshiba e-Studio2505AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2505AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
Envelope Drawer
Open the paper source drawer, and remove the misfed paper.
1
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
2
close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for envelope is not exceeded when placing envelope in the Envelope
Drawer. The amount of envelope you can load in the drawer is lower than that for plain paper.
Large Capacity Feeder
Open the drawer of the Large Capacity Feeder.
1
Pull out the right-hand tray and remove the misfed paper.
2
Clearing a Paper Misfeed 31
Hide quick links:
Advertisement
Table of Contents
