Bypass Tray - Toshiba e-Studio2505AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2505AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
3
Check that there is no folded/curled paper or overloading, and then close the drawer of the Large
Capacity Feeder.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.
Bypass tray
Move the green paper holding lever toward the outside.
1
The paper can now be removed.
Pull out the misfed paper in the bypass tray.
2
Place paper in the bypass tray again and then move the green paper holding lever toward the
3
inside.
If a sheet of paper is stained, folded or torn, replace it with a new one.
32 Clearing a Paper Misfeed
Hide quick links:
Advertisement
Table of Contents
