Toshiba e-Studio3005AC Software Installation Manual page 41

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
If your TOSHIBA MFP is not found
If your TOSHIBA MFP is not found, you must first install the printer driver by temporarily selecting a local port and then
configuring the Raw TCP/LPR port.
If this equipment is not discovered over the network after the installation is started, a dialog box indicating this
appears. Click [Continue] to continue the configuration.
Select [Use the following port] and then select "LPT1: ". Then click [OK].
7
Confirm that the installation is completed, and then click [Finish].
8
The Installer may ask you to restart your computer. If it does, select "Yes, I want to restart my computer now."
and click [Finish] to restart your computer.
Click [Exit].
9
When a message appears asking whether to finish the installer, click [Yes].
Open the printers folder.
10
Right-click [Start], then click [Control Panel] > [View devices and printers].
 For Windows 8.1 / Windows Server 2012, right-click in the lower left of the screen, then click [Control Panel] >
[Devices and Printers].
 For Windows 7, click [Start] > [Devices and Printers].
 For Windows Vista / Windows Server 2008, click [Start] > [Control Panel] > [Hardware and Sound] > [Printers].
Installing the Printer Drivers 41