Toshiba e-Studio3005AC Software Installation Manual page 125

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Finishing
Option Value
Destination Printer's Default
Exit Tray
Tray 1
Tray 2
Upper Exit Tray
Side Exit Tray
Job Separator Upper
Job Separator Lower
Folding Off, On
Hole Punch Off
Long Edge Punch without rotation
Short Edge Punch without rotation
Long Edge Punch with 180 degree
rotation
Short Edge Punch with 180 degree
rotation
Stapling Off
Upper Left (Portrait)/Upper Right
(Landscape)
Middle Left (Portrait)/Middle Top
(Landscape)
Lower Left (Portrait)/Upper Left
(Landscape)
Upper Right (Portrait)/Lower Right
(Landscape)
Middle Right (Portrait)/Middle Bottom
(Landscape)
Lower Right (Portrait)/Lower Left
(Landscape)
Middle Top (Portrait)/Middle Right
(Landscape)
Middle Bottom (Portrait)/Middle Left
(Landscape)
Saddle Stitch (Portrait)/Saddle Stitch
(Landscape)
[Continue] Determines the selected items.
button
General
Option Value
Collate Yes, No
Duplex 1-Sided
2-Sided, No Tumble (Long-Edge
Binding)
2-Sided, Tumble
(Short-Edge Binding)
Alternative Value
Alternative Value
Description
Select a destination.
The destinations that you can choose vary depending
on the model and the installed options.
Select whether the Folding feature is enabled or not.
Select the hole punch option.
Select whether a print job is stapled or its locations.
"Saddle Stitch (Portrait)/Saddle Stitch (Landscape)"
can be selected only when the Saddle Stitch Finisher
is installed.
Description
Select whether to collate exited paper.
1-sided printing
2-sided printing (Long-edge binding)
2-sided printing (Short-edge binding)
Setting Up the CUPS 125