2.RECOMMENDED INSTALLATION
3. Click [OK].
*
When SNMP V1, V2, and V3 are configured for your TOSHIBA MFP, perform both of the above settings.
A list of the discovered printers is displayed. Then select this equipment on the list and then click
5
[OK].
The TCP/IP port is created.
The installation starts.
6
When the installation is complete, click [Finish].
7
The main menu is displayed.
The Installer may ask you to restart your computer. If it does, select "Yes, I want to restart my computer now."
and click [Finish] to restart your computer.
Click [Exit].
8
When a message "Do you want to close TOSHIBA e-STUDIO Software Installer?" appears asking whether to finish
the installer, click [Yes].
Procedure for Recommended Installation 29