Toshiba e-Studio3005AC Software Installation Manual page 45

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
 SMB printing
Install a printer driver by specifying the SMB port manually.
 Before starting the configuration, make sure that this equipment is connected to a network and also that its power
is turned ON.
 If this equipment is not discovered over the network after the installation is started, a dialog box indicating this
appears. Click [Continue] to continue the configuration.
Enter a network path shown below in [Selected printer port].
7
\\<IP address or host name>\print
Click [OK].
8
Confirm that the installation is completed, and then click [Finish].
9
The Installer may ask you to restart your computer. If it does, select "Yes, I want to restart my computer now."
and click [Finish] to restart your computer.
Click [Exit].
10
When a message appears asking whether to finish the installer, click [Yes].
Installing the Printer Drivers 45