Toshiba e-Studio3005AC Software Installation Manual page 44

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
18 Make sure the created Raw TCP or LPR port is checked in the [Print to the following port(s)] list.
When the LPD Print setting is enabled, you can also configure LPR printing. When you want to configure LPR
printing, follow the procedure below.
1. Click [Configure Port].
2. Select [LPR] at the [Protocol] group, enter "print" in the [Queue Name] box at the [LPR Settings] group, and
then click [OK].
Click [OK] to save the setting.
19
44 Installing the Printer Drivers