Section 3 - Configuration
This page will allow you to upgrade the extender's firmware, either
automatically or manually. To manually upgrade the firmware, you must first
download the newest firmware file from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Displays the current firmware version and date for Covr Point A (master)
and any additional Covr Points unit (extender).
Check for New
Click this button to prompt the extender to automatically check for a new
firmware version. If a newer version is found, click Upgrade Firmware
to download and install the new firmware.
If you wish to upgrade manually, first download the firmware file you
wish to upgrade to. Next, select a device from the drop-down menu to
upgrade firmware for. Then, click the Select File button and browse to
the firmware file you want to install. With the file selected, click Upload
to begin the upgrade process.
D-Link COVR-C1203 User Manual