D-Link COVR-C1203 User Manual page 40

Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
Select Create a new session to start a new PPPoE session.
PPPoE Session:
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Select Static IP if your ISP assigned you an IP address. In most cases,
Address Mode:
select Dynamic IP.
IP Address: If you selected Static IP as the Address Mode, enter the IP address
provided by your ISP.
Service Name:
Enter the ISP service name (optional).
Reconnect Mode: Select either Always On or Manual.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
D-Link COVR-C1203 User Manual
PPPoE
36