D-Link COVR-C1203 User Manual page 44

Section 3 - Configuration
Advanced Settings - Address Autoconfiguration Settings
Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Enter the router advertisement lifetime (in minutes).
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
Range (Start):
IPv6 Address Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
Range (End):
IPv6 Address Enter the IPv6 address lifetime (in minutes).
Lifetime:
Click Save when you are done.
D-Link COVR-C1203 User Manual
6rd (Continued)
40