Download Print this page

D-Link COVR-C1203 User Manual page 30

Covr point ac1200 dual band whole home wi-fi system
Hide thumbs

Advertisement

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider
(ISP) uses a L2TP connection. Your ISP will provide you with a username and
password.
L2TP Server:
Enter the L2TP server IP address provided by your ISP.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Select either Always on, On demand, or Manual.
Reconnect Mode:
Maximum Idle
Enter a maximum idle (in minutes) time during which the Internet
Time:
connection is maintained during inactivity. To disable this feature,
select Always on as the reconnect mode.
Advanced Settings
Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
If you selected Dynamic IP as the Address Mode:
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
D-Link COVR-C1203 User Manual
L2TP
26

Hide quick links:

Advertisement

loading

  Related Manuals for D-Link COVR-C1203

This manual is also suitable for:

Covr-c1200Covr seriesCovr-1100Covr-1102Covr-1103