Handset Security; Phone Lock; Password Lock - SoftBank 920SC User Manual

Tip
• USIM password
This is a password dedicated to USIM Card
authentication. If USIM password matches, another
USIM Card may be used in 920SC.
Change USIM password each time USIM check setting
is set to Enable.
• When you forget your USIM password
Insert a USIM Card (with USIM lock set to Enable) in
920SC and execute All reset ( P.14-12).

Handset Security

Phone Lock

Default Disable
■
Setting
Set Phone lock to Enable; then Phone Password
entry is required each time the power is turned on.
APress c and select Settings →
Security → Phone lock
BSelect the setting and press c (Save)
CEnter Phone Password and press
c (Confirm)

Password Lock

Default Disable
■
Setting
Set Password lock to Enable; Press any key in
Standby; Phone Password entry window appears.
Enter Phone Password to cancel Password lock;
920SC operations are enabled.
APress c and select Settings →
Security → Password lock
BSelect a setting and press c (Save)
CEnter Phone Password and press
c (Confirm)
14
14-5