SoftBank 920SC User Manual page 79

BPlug Charger into an AC 100V outlet
AC 100V
Charge
CWhen battery is charged, unplug
Charger, then disconnect handset
Tip
• Battery Charged Confirmation
If 920SC is on while Charger is connected, battery
indicators flash when battery is fully charged.
While charging, battery indicators change as follows:
. flashes when battery is fully
→ →
charged.
If 920SC is off while Charger is connected, charging
battery animation and Charging... appear. When
battery is fully charged, full battery graphics and
Battery full appear.
• Charging Time
An empty battery requires 170 minutes (approx.) to
charge when power off. Charging time may vary by
ambient temperature.
Charging via PC USB Port
Battery will be charged when 920SC is connected to a
PC via the supplied USB cable.
a Open Port Cover and insert USB Cable Connector
b Insert USB Connector into a PC USB port
c When battery is charged, remove Connector from
920SC and replace Port Cover, then remove USB
Connector from the PC USB port
1
1-17