Table of Contents
Advertisement
Getting Started
Handset Security
USIM PINs
There are two USIM Card security codes: PIN & PIN2
PIN and PIN2 are set to 9999 by default.
PIN/PIN2 can be changed (ZP.XX-XX).
4 to 8-digit code used to prevent unauthorized handset use.
When PIN Certification is ON (ZP.XX-XX), PIN entry is
PIN
required each time handset is turned on (with USIM Card
inserted).
Required to clear call costs or set maximum cost
PIN2
(ZP.XX-XX).
PIN Certification
Main Menu 4
Settings
4
Security
＞
Enter PIN
ON or OFF 7
PIN/PIN2 Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is incorrectly
entered three times. Cancel PIN Lock or PIN2 Lock by entering PIN
Unblocking Key (PUK/PUK2).
Note
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and handset
is disabled. Write down PUK/PUK2.
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center, General Information (ZP.XX-XX).
4
PIN Certification
Passwords
Phone Password
4 to 8-digit number required to use/change some handset
functions.
e appears for each digit entered.
Phone Password can be changed on handset (ZP.XX-XX).
■
Changing Phone Password
＞Main
Menu 4 Settings 4
4 Enter current 4 to 8-digit Phone Password 4 Enter new 4 to 8-digit Phone
Password 4 YES
Center Access Code (Call Barring Password)
4-digit number specified at initial subscription; required to access
Voice Mail via landlines, subscribe to fee-based information or
restrict handset services.
If entered incorrectly three times, Security Code settings lock; Security Code &
Center Access Code must be changed. Reach SoftBank Mobile Customer Center,
General Information (ZP.XX-XX) for details.
1-14
<Default> 9999
Security
Change Phone Password
4
Advertisement
Table of Contents
