Procedures - SoftBank 920SC User Manual

Procedures

Create messages in the flow shown below. Enter and
set options other than Address as required.
18
Creating S! Mail
Enter an address (
Enter a subject ( P.18-10)
Enter message text (
Attach/Insert files
( P.18-15, 18-19)
Set any sending options (
Send the message (
18-8
Tip
• To set sending options beforehand ( P.21-2, 21-5)
Automatic Change of Message Type
When message creation is started, the message type is
Creating SMS
set to SMS; it automatically changes to S! Mail when
one of the following occurs:
P.18-8) • Entering mail address as an address
• Entering a subject
• Entering characters exceeding the number of
characters that can be sent by SMS
• Inserting files on Slide Show page
• Attaching or inserting a file
P.18-11)
• Changing the address type to Cc or Bcc
When the message is modified to allow it to be sent as
SMS, for example, by deleting an attached or inserted
file or a subject, the message type automatically
changes to SMS.
Depending on message creation conditions, it may not
P.18-11)
automatically change type. If the mail type is not
changed automatically, change it manually ( P.18-11).
P.18-11)