Handset Security; Phone Lock; Password Lock - SoftBank 708SC User Manual

Tip
• USIM password
This is a password dedicated to USIM Card
authentication. If the USIM password matches, the
other USIM Card can also be used for 708SC.
Change USIM password each time the USIM check
setting is set to Enable.
• When you forget your USIM password
Insert a USIM Card (with USIM lock set to Enable) to
708SC and execute All reset ( P.13-11).

Handset Security

Phone Lock

Default Disable
■
Setting
Set Phone lock to Enable; then Phone Password
entry is required each time the power is turned on.
APress c and select Settings →
Security → Phone lock
BSelect the setting and press c (Save)
CEnter Phone Password and press
c (Confirm)

Password Lock

Default Disable
■
Setting
Set Password lock to Enable; then hide Softkeys in
Standby. Press any key; Phone Password entry
window appears. Enter Phone Password to cancel
Password lock; 708SC operations are enabled.
APress c and select Settings →
Security → Password lock
BSelect the setting and press c (Save)
CEnter Phone Password and press
c (Confirm)
13
13-5