Advertisement
V2 S.p.A.
Corso Principi di Piemonte, 65/67
12035 RACCONIGI (CN) ITALY
tel. +39 01 72 81 24 11 - fax +39 01 72 84 050
info@v2home.com - www.v2home.com
CALYPSO
ATTUATORE ELETTROMECCANICO IRREVERSIBILE
I
PER CANCELLI A BATTENTE
IRREVERSIBLE ELECTROMECHANICAL ACTUATOR
GB
FOR SWING GATES
OPERATEUR ELECTROMECANIQUE IRREVERSIBLE
F
POUR PORTAILS BATTANTS
OPERADOR ELECTROMECÁNICO IRREVERSIBLE
E
PARA CANCELAS BATIENTES
ACTUADOR ELECTROMECÂNICO IRREVERSÍVEL
P
PARA PORTÕES DE BATENTE
NICHT UMKEHRBARER ELEKTROMECHANISCHER
D
ANTRIEB FÜR FLÜGELTORE
ELEKTROMECHANISCHE, ONOMKEERBARE
NL
LINEAIRE MOTOR VOOR HEKKEN MET VLEUGELS
IL n. 186
EDIZ. 04/03/2010
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for V2 Calypso 400
Summary of Contents for V2 Calypso 400
- Page 1 V2 S.p.A. Corso Principi di Piemonte, 65/67 12035 RACCONIGI (CN) ITALY IL n. 186 tel. +39 01 72 81 24 11 - fax +39 01 72 84 050 EDIZ. 04/03/2010 info@v2home.com - www.v2home.com CALYPSO ATTUATORE ELETTROMECCANICO IRREVERSIBILE PER CANCELLI A BATTENTE...
- Page 2 +39-0172.812411 operating Monday to Friday www.v2home.com from 8:30 to 12:30 and from 14:00 to 18:00. V2 has the right to modify the product without previous EC DECLARATION OF INCORPORATION FOR notice; it also declines any responsibility to damage or...
-
Page 3: Technical Data
TECHNICAL DATA Calypso Calypso Calypso400 Calypso500 400-120V 500-120V Max. leaf lenght Max. leaf weight Power supply VAC - Hz 230 - 50 230 - 50 120 - 60 120 - 60 Idling current Full load current Maximum Power Capacitor µF Max travel Operating speed 0,016... - Page 4 INSTALLATION LAYOUT cable 4 x 1 mm CALYPSO actuator cable 4 x 1 mm (RX) Internal photocells cable 2 x 1 mm (TX) cable 2 x 1,5 mm Blinker cable 4 x 1 mm (RX) cable RG-58 External photocells Aerial cable 2 x 1 mm (TX) Key or digital selector...
- Page 5 1190 WARNING: In the case of leaf longer than 2 metres, 1180 an electric lock must be fitted to ensure an efficent closig. 90° 1170 1170 1170 CALYPSO 400 1170 γ 1180 A [mm] B [mm] C [mm] F [mm]...
- Page 6 ACTUATOR FIXING Choose measures referring to the table you can find in the previous page, mark them on the pillars and continue as follows: • Fix the clamps to the pillar and to the gate soldering directly; if the material does not allow it, it is necessary to solder the clamps to plates to be fixed to the gate and the pillars by screws.
- Page 7 TO CONNECT CALYPSO WITH CONTROL UNIT YELLOW - GREEN WARNING: always remember to connect the earth BLUE (230V mod.) according to current standards (EN 60335-1, EN 60204-1). COMMON WHITE (120V mod.) Avoid tension in the cable during open and close operations. BLACK CLOSING BROWN...
Need help?
Do you have a question about the Calypso 400 and is the answer not in the manual?
Questions and answers