Blaupunkt New Jersey MP68 Operating And Installation Instructions page 82

Tuner mode
In regular tuner mode, "Norm" is displayed on the
left side in the menu selection
To change from regular tuner mode to menu
mode and back,
press the DIS•ESC button ;.
u
In menu mode, "List" is displayed in the menu se-
F
lection instead of "Norm". The "List" menu (list
of stored stations) is selected. The options of the
G
"List" menu are displayed
F
F
Menu selection
G
Options of the current menu
You can switch between the menus with the rock-
@. The options of the respec-
er switch or
G
tive menu are displayed.
Setting the waveband/
You can adjust and set radio stations of the FM,
MW and LW wavebands.
The wavebands MW and LW each provide one
memory bank with 10 memory locations each.
The FM waveband features 2 memory banks each
with 10 memory locations each: FM and FMT .
Press the TUNER button =.
u
OR:
To change to the menu mode, press the
u
DIS•ESC button ;.
Press the rocker switch @ twice to open
u
the "Band" menu.
Press the rocker switch
u
the desired waveband or memory bank.
Press the OK button :.
u
82
The desired waveband or memory bank is adjust-
F
. ed. After a short period of time, the display auto-
matically returns to the regular tuner mode.
You can now perform the following actions in this
waveband/memory bank:
•
•
Adjusting stations
There are 3 ways of tuning into a station :
•
•
•
Station seek tuning
G
u
If you press and hold the rocker switch
found until you release the rocker switch again.
The tuner searches for the next receivable station
in the current waveband. The adjusted sensitivity
of the station seek tuning (section "Changing the
seek tuning sensitivity") and the following set-
memory bank
tings are taken into consideration:
•
•
@ to select
or
Adjusting stations
Storing stations
Tuning into stations automatically (station
seek tuning)
Tuning into stations manually
Selecting stored stations
Press the rocker switch
@ automatic seek tuning skips the stations
The "PTY TYPE" (programme type) setting in
the "TUNER" menu: The tuner searches for
stations that are broadcasting the defi ned
programme type.
The "TRAFFIC" (traffi c information) setting
in the "TUNER" menu: With priority for traffi c
announcements, the tuner exclusively
adjusts traffi c information stations.
Note:
These settings are available only for FM.
An exact description of these settings can
be found in the following sections of this
chapter.
@.
or
or