Displaying Radio Text; Scanning All Receivable Stations - Blaupunkt New Jersey MP68 Operating And Installation Instructions

Tuner mode
Changing the seek tuning sensitivity
(SENS )
The seek tuning sensitivity determines whether
the automatic station seek tuning locates only
strong stations or also weaker stations. You can
adjust the seek tuning sensitivity separately for
the FM and MW/LW wavebands.
Select the waveband for which you want to
u
set the seek tuning sensitivity.
Press the MENU button 9.
u
The Tuner menu opens.
Press the rocker switch
u
the "SENS" function.
Press the OK button :.
u
Press the rocker switch or @ to adjust
u
the sensitivity between "SENS LOW 1"
(lowest sensitivity) and "SENS HIGH 6"
(highest sensitivity.
Press the OK button : to select a different
u
function, or press the DIS•ESC button ; to
exit the menu.

Scanning all receivable stations

(BANDSCAN )
You can scan all receivable stations of a wave-
band. The scan time can be set as described in
the chapter "User settings".
Select the waveband (FM, MW, LW) whose
u
receivable stations you want to scan.
To change to the menu mode, press the
u
DIS•ESC button ;, if necessary.
Press the rocker switch @ to open the
u
"Tune" (adjusting stations) menu.
The "BANDSCAN" function is selected.
Press the OK button :.
u
"SCAN" and the current frequency or the station
name appear on the display.
The tuner is searching for stations. As soon as
the tuner has located a station, it is played.
84
To continue listening to the currently scanned
station,
u
After a complete search of the frequency band,
scanning stops. The previously set station is
played.

Displaying radio text

In addition to your programme, stations can
broadcast text news (radio text) that can be
shown on the display.
To switch the display of radio text on/off:
@ to select
or
u
The Tuner menu opens.
u
u
u
u
Receiving traffi c announcements
If you switch on the priority for traffi c announce-
ments, the device uses the RDS services TA
(Traffi c Announcement) and EON (Enhanced
Other Network). TA switches traffi c reports even
if you are currently listening to a different audio
source. The volume for the traffi c announcement
can be adjusted (see the chapter "User settings",
section "Changing volume presettings").
If no traffi c information station is currently de-
fi ned, the RDS service EON ensures that the de-
vice automatically changes to a traffi c informa-
tion station of the same broadcasting network
for the duration of a traffi c announcement.
Press the OK button :.
Press the MENU button 9.
Press the rocker switch
the "R-TEXT" function.
Press the OK button :.
Switch between the settings with the rocker
switch or @.
•
"RADIO TEXT"
•
"RADIO TEXT"
Press the OK button : to select a different
function, or press the DIS•ESC button ; to
exit the menu.
@ to select
or
: Radio text on.
: Radio text off.