Download Print this page

Switching Off Rinse Aid Refill Indicator; Utensils; Not Suitable; Glass And Utensil Damage - Siemens SN series Instruction Manual

Hide thumbs

Advertisement

Switching off rinse aid refill
indicator
If the rinse aid refill indicator )*
bothers you (e.g. if you are using a
combination detergent with a rinse aid
component), you can switch off the
rinse aid refill indicator.
Proceed as described under "Setting
rinse aid quantity" and set the level to
§:‹‹. The rinse aid refill indicator )* is
switched off.
-

Utensils

N ot suitable
U t e n s i l s
Cutlery and utensils made of wood.
Delicate decorative glasses, craft
and antique utensils. These decors
are not dishwasher-proof.
Plastic parts not resistant to heat.
Copper and tin utensils.
Utensils which are soiled with ash,
wax, lubricating grease or ink.
Aluminium and silver parts have
a tendency to discolour and fade during
the wash cycle. Even some types of
glass (e.g. crystal glass objects) may
turn cloudy after many wash cycles.

Glass and utensil damage

Causes:
Glass type and glass production
process.
Chemical composition of the
detergent.
Water temperature of the wash
programme.
Recommendation:
Use only glasses and porcelain
which the manufacturer designates
as dishwasher-proof.
Use a detergent which protects
utensils.
Take glass and cutlery out of
the dishwasher as soon as possible
after the programme ends.

Loading the dishwasher

Remove large food remnants. It
1.
is not necessary to prerinse utensils
under running water.
Place the utensils so that
2.
they are secure and cannot tip
over.
all utensils with their openings
face down.
parts with curves or indentations
are at an angle, thereby allowing
water to drain.
does not obstruct rotation of the
two spray arms 1: and 1Z.
Very small utensils should not be
washed in the machine, as they may fall
out of the baskets.
Utensils en
23

Advertisement

loading

This manual is also suitable for:

Sx series