Table of Contents
Advertisement
4. Release both buttons.
The LED for button # flashes
and the digital display )" displays
the factory setting •:‹....
5. Press programme button # until
the factory set value §:‹...
is indicated on the digital
display )".
To change the setting:
1. Press programme button 3.
Each time the button is pressed,
when the value of §:‹‡ has been
the set value increases by one level;
to §:‹‹ (off).
reached, the display jumps back
2. Press START button P.
The set value is saved.
Switching off rinse aid refill
indicator
If the rinse-aid refill indicator h is
impaired (e.g. when using combined
detergents containing rinse aid
component), it can be switched off.
Proceed as described under "Setting
■
value to §:‹‹.
amount of rinse aid" and set the
The rinse aid refill indicator h is now
switched off.
-
Utensils
U te n s ils
Not suitable
Cutlery and utensils made of wood.
■
Delicate decorative glasses, craft
■
and antique utensils. These decors
are not dishwasher-proof.
Plastic parts not resistant to heat.
■
Copper and tin utensils.
■
Utensils which are soiled with ash,
■
wax, lubricating grease or ink.
Aluminium and silver parts have a
tendency to discolour and fade during
the wash cycle. Even some types of
glass (e.g. crystal glass objects) may
turn cloudy after many wash cycles.
Glass and utensil damage
Causes:
Glass type and glass production
■
process.
Chemical composition of the
■
detergent.
Water temperature of the wash
■
programme.
Recommendation:
Use only glasses and porcelain
■
which the manufacturer designates
as dishwasher-proof.
Use a detergent which protects
■
utensils.
Take glass and cutlery out of the
■
dishwasher as soon as possible after
the programme ends.
Utensils
en
15
Advertisement
Table of Contents
