Table of Contents
Advertisement
Sending Scan Files by Scan to Folder
❒ Even if the connection test was successful, the machine may fail to transfer
the file if you do not have write privileges for the file or there is not enough
free hard disk space.
❒ You can register the destination path in the machine's address book. For
details, see "Registering Manually-Entered E-mail Address to Address
Book".
Reference
2
p.26 "Registering Manually-Entered E-mail Address to Address Book"
Specify the path by browsing to a destination folder
You can browse the network and specify the path to a destination folder in an
NDS tree or on a NetWare server.
A
Press [Dest.:].
B
Select [NCP], and then press {OK}.
C
Select the connection type. Press [NDS] to specify the in an NDS tree. Press
[Bindery] to specify the folder on a NetWare server.
D
Press [Browse Network], and then press {OK}.
A list of NetWare servers or NDS trees on the network appears.
64
Advertisement
Table of Contents
