Table of Contents
Advertisement
Sending Scan Files by Scan to Folder
Entering the path to a destination folder
Use the following procedure to enter the path to an NDS tree or NetWare server
manually.
A
Press [Dest.:].
2
B
Select [NCP], and then press {OK}.
C
Select the connection type. Press [NDS] to specify the folder in the NDS tree.
Press [Bindery] to specify the folder on the NetWare server.
D
Select [Manual Entry], and then press {OK}.
E
Enter the destination folder path, and then press {OK}.
If you set the connection type to [NDS], the NDS tree name is "tree", the name
of the context including the volume is "context", the volume name is "vol-
ume", and the folder name is "folder", the path will be \\tree\volume.con-
text\folder". If you set the connection type to [Bindery], the NetWare server
name is "server", the volume name is "volume", and the folder name is "fold-
er", the path will be "\\server\volume\folder".
62
Advertisement
Table of Contents
