Ricoh Aficio 106/LD215c Function Manual page 31

K
Press [Search].
Destinations that match the search conditions are displayed.
L
Press {U} or {T} to select the destination, and then press {V}.
The check box on the left side of the selected destination is selected.
M
Press {OK}.
Note
❒ Up to 100 destinations can be displayed as search results.
❒ If an e-mail address returned by the LDAP server is too long, it will be im-
possible to specify it as the destination. For details about the number of
characters that can be specified, see "E-mail".
❒ It is possible for more than one e-mail address to be registered for a desti-
nation. However, only one e-mail address per destination will appear in
the search results. It depends on the LDAP server which e-mail address
will be displayed. Usually, it is the e-mail address registered first.
❒ You can select criteria from the following list:
• [Include]: The names which contain an entered character or characters are
targeted.
Example) To find "ABC", enter "A", "B" or "C".
• [Exclude]: The names which do not contain an entered character or charac-
ters are targeted.
Example) To find "ABC", enter "D".
• [First Word]: The names which start with the entered character or characters
are targeted.
Example) To find "ABC", enter "A".
• [Last Word]: The names which end with the entered character or characters
are targeted.
Example) To find "ABC", enter "C".
Specifying Destination
23
1