Table of Contents
Advertisement
The following table shows the relationship between the original orientation
and the Scanner Control dialog box settings:
Placing an Original on the Exposure Glass
Placing Originals
top edge touches top left of exposure glass
This orientation is the TWAIN driver's stan-
dard setting. Place originals in this orienta-
tion normally
top edge touches rear of exposure glass
Placing an Original in the ADF/ARDF
Original Orientation
top edge of original placed first
top edge touches rear of ADF/ARDF
Note
❒ Originals are normally rectangular ( ) or horizontally long ( ). However,
the table above uses squares to make original orientation easier to under-
stand. Even if the actual shape of the original is different, the combination
of original orientation and the orientation specified on the scanner driver
does not change.
❒ For details about the Scanner Control dialog box, see "Basic Procedure for
Scanning Files Using TWAIN Scanner".
❒ Depending on the settings, originals of different sizes are scanned differ-
ently.
Reference
p.91 "Basic Procedure for Scanning Files Using TWAIN Scanner"
Basic Procedure for Scanning Files Using TWAIN Scanner
TWAIN Scanner Control Dialog Box Key
TWAIN Scanner Properties Dialog Box Key
4
93
Advertisement
Table of Contents
