The Machine Does Not Print - Ricoh DDST A, DDST B Operating Instructions Manual

Troubleshooting

The Machine Does Not Print

Possible Cause
Is the power on?
Is the machine online?
Does the Printer key stay
red?
Is there a warning status or
error message on the dis-
play?
Is the interface cable con-
nected securely to the ma-
chine and computer?
5
Are you using the correct
interface cable?
Was the interface cable
connected after the ma-
chine was turned on?
36
Check the cable is securely plugged into the power outlet and the
machine.
Turn on the main power switch.
If not, press {fOnline} on the control panel.
If so, check the error message on the display and take required ac-
tion.
If so, check the error message or warning status on the display and
take the required action.
Connect the interface cable securely. If it has a fastener, fasten that
securely as well.
See p.5 "Connecting the Machine"".
The type of interface cable you should use depends on the compu-
ter. Be sure to use the correct one. If the cable is damaged or worn,
replace it.
See p.5 "Connecting the Machine".
Connect the interface cable before turning on the machine.
Solutions