Reading The Display And Using Keys - Ricoh DDST A, DDST B Operating Instructions Manual

Getting Started

Reading the Display and Using Keys

This section explains how to read the display and using the selection key for the
initial display.
1
Note
❒ The copy display is set as the default screen when the machine is turned on.
You can change the settings in [System Settings]. See General Settings Guide.
1.
Selection keys
Correspond to the function items at the
bottom line on the display.
Example: Basic screen
When the instruction "press [JobReset]"
appears in this manual, press the center
selection key.
2. {Escape} key
Press to cancel an operation or return to
the previous display.
4
Escape
1 2
3. {OK} key
Press to set a selected item or entered nu-
meric value.
4.
Scroll keys
Press to move the cursor in each direc-
tion, step by step.
When the {U}, {T}, {V}, or {W} key ap-
pears in this manual, press the scroll key
of the same direction.
4
OK
3
ANX007S