Table of Contents
Advertisement
Safety information - ActivPanel
•
Inspect the ActivPanel for any physical damage to the casing before use. If damage is apparent, take care to
avoid contact with any potentially live parts.
•
Do not under any circumstances try to gain access to internal parts of the ActivPanel. If you suspect that the
device is damaged or faulty, you should contact Technical Customer Support, or an authorised Promethean
service agent for advice.
•
Always use accessories recommended by Promethean to ensure compatibility.
•
Only use the power cable that is compatible with your mains outlet socket. If you are unsure of the electrical
compatibility of your equipment, please contact Promethean or an authorised Promethean service agent
before attempting to connect the device to the mains supply.
•
Use a wall socket that is close to the ActivPanel and that is easily accessible.
•
Firmly insert the power plug into the wall socket. Partial connection could cause sparks.
•
To avoid the risk of electric shock or component damage, disconnect the ActivPanel from the power supply
before plugging in any other cables.
•
Hold the power plug when unplugging the device. Pulling the power cable may damage the wires inside the
cable and cause fire or electric shock.
•
To avoid the risk of electric shock, do not touch the power plug with wet hands.
•
Unplug the power plug before cleaning the ActivPanel.
•
Do not use any liquid or spray cleaner when wiping the device. We recommend mixing a solution of
50% isopropanol and 50% water in a spray bottle, and spraying this onto a micro-fibre or 100% cotton cloth. Wipe
the glass surface gently; do not spray the solution onto the ActivPanel. Doing so could saturate the electronics
and cause damage to the device. Only a small amount of the solution is needed to clean and sanitize the glass.
•
Do not use volatile solvents (such as alcohol, rosin, and toluene) to clean the ActivPanel. These types of
chemicals might damage the housing.
•
Do not use abrasive cleaners.
•
Do not apply pressure to the screen. Allow the glass to air dry.
•
When moving the ActivPanel from an area of low temperature to one of high temperature, condensation may
form on the housing. Do not power on the device immediately after this to avoid causing fire, electric shock or
component damage.
•
To avoid electric shock, avoid handling the power cable during electrical or thunder storms.
•
Unplug the ActivPanel during a lightning storm or when it will not be used for a long period of time. This will
protect the device from damage due to power surges.
•
Do not place the ActivPanel in front of an air conditioning unit to avoid condensation which could cause fire,
electric shock or component damage.
•
The ventilation holes in the housing are designed to protect the ActivPanel against overheating. Be careful not
to block them.
•
Do not embed the ActivPanel in a cabinet, unless the cabinet is well ventilated.
•
Do not put the ActivPanel on or beside any radiator or heater.
•
Do not insert hands or any other objects into the ventilation holes or signal joints of the ActivPanel.
•
Never place, spill or pour any liquid on any part of the ActivPanel. The device could short circuit causing a fire or
electric shock.
•
Do not apply excessive pressure to the surface of the ActivPanel.
•
Do not use your fingers or any other hard object to knock, press on or scratch the screen of the ActivPanel.
•
Do not put any flammable or explosive objects near the ActivPanel.
•
Manufacturer-reported maximum luminance LMax_Reported is 400cd/m2.
5
ActivPanel System Install and User Guide
Hide quick links:
Advertisement
Table of Contents
