Table of Contents
Advertisement
Safety information -
ActivConnect G-Series
This product is an optional accessory.
•
Inspect the ActivConnect G-Series for any physical damage to the casing before use. If damage is apparent,
take care to avoid contact with any potentially live parts.
•
Do not under any circumstances try to gain access to internal parts of the ActivConnect G-Series. If you
suspect that the device is damaged or faulty, you should contact Technical Customer Support, or an
authorised Promethean service agent for advice.
•
To avoid the risk of electric shock or component damage, disconnect the ActivConnect G-Series from the
power supply before removing the ActivConnect G-Series.
•
The ventilation holes in the housing are designed to protect the ActivConnect G-Series against overheating. Be
careful not to block them.
•
Do not insert hands or any other objects into the ventilation holes or signal joints of the ActivConnect G-Series.
•
Never place, spill or pour any liquid on any part of the ActivConnect G-Series. The device could short circuit
causing a fire or electric shock.
•
Do not place the ActivConnect G-Series in front of an air conditioning unit to avoid condensation which could
cause fire, electric shock or component damage.
•
Do not put the ActivConnect G-Series on or beside any radiator or heater.
•
Do not put any flammable or explosive objects near the ActivConnect G-Series.
•
Always use accessories recommended by Promethean to ensure compatibility.
•
Only use the power cable that is compatible with your mains outlet socket. If you are unsure of the electrical
compatibility of your equipment, please contact Promethean or an authorised Promethean service agent
before attempting to connect the device to the mains supply.
•
Use a wall socket that is close to the ActivConnect G-Series and that is easily accessible.
•
Firmly insert the power plug into the wall socket. Partial connection could cause sparks.
•
To avoid the risk of electric shock or component damage, disconnect the ActivConnect G-Series from the
power supply before plugging in any other cables.
•
Hold the power plug when unplugging the device. Pulling the power cable may damage the wires inside the
cable and cause fire or electric shock.
•
To avoid the risk of electric shock, do not touch the power plug with wet hands.
•
Unplug the power plug before cleaning the ActivConnect G-Series.
•
To avoid electric shock, avoid handling the power cable during electrical or thunder storms.
•
Unplug the ActivConnect G-Series during a lightning storm or when it will not be used for a long period of time.
This will protect the device from damage due to power surges.
•
Do not use any liquid or a spray cleaner when wiping the device. Use a slightly damp cloth. Do not use abrasive
cleaners.
•
When moving the ActivConnect G-Series from an area of low temperature to one of high temperature,
condensation may form on the housing. Do not power on the device immediately after this to avoid causing
fire, electric shock or component damage.
If any of the following occurs, please contact Technical Customer Support:
•
Liquid sprays, or any object drops, into the ActivConnect G-Series.
•
The ActivConnect G-Series is dropped or damaged in any way.
11
ActivPanel System Install and User Guide
Hide quick links:
Advertisement
Table of Contents
