Designate - Ricoh 152235 Operating Instructions Manual

A
Press [Cover/Slip Sheet].
B
Press [Front Cover] or [Front/Back
Cover].
C
Select [Copy] or [Blank] for the cov-
er sheet.
D
Select the paper tray that contains
the sheet paper to copy the origi-
nals, and then press [OK].
E
Place your originals in the ADF,
and then press the {Start} key.

Designate

Use this function to have certain pag-
es of your original copied onto slip
sheets.
Preparation
Before using this function, set the
special paper tray for slip sheets.
See "Cover Sheet Tray"and "Slip
Sheet Tray"in " Tray Paper Set-
tings", General Settings Guide.
Note
❒ The slip sheets should be the same
size and orientation as the copy pa-
per.
❒ You cannot place the copy paper in
the bypass tray.
❒ You can specify the pages up to 20.
A
Press [Cover/Slip Sheet].
B
Press [Desig./Chapter].
C
Press the key to select the chapter
number.
D
Enter the page number of the
original's location you want to
copy onto a slip sheet with the
number keys, and then press the
{#} key.
E
Select the paper tray for slip
sheets.
F
To specify another page location,
repeat steps C to E.
Note
❒ To select chapters 11 to 20, press
the [T11∼20] key.
G
When page designation is com-
plete, press [OK].
H
Press [OK].
I
Select the paper tray that contains
the sheet paper to copy the origi-
nals.
J
Place your originals in the ADF,
and then press the {Start} key.
Copier Functions
2
71